Double Bell Type 56 Airsoft: Your Guide & Best Deals!

This specific replica is a spring-powered or gas blowback airsoft gun modeled after the Chinese Type 56 assault rifle. It is manufactured by a company known as Double Bell and designed to fire 6mm plastic BBs, offering a realistic aesthetic for recreational use and airsoft skirmishes.

This particular model provides an entry point into the world of airsoft for enthusiasts seeking an affordable and visually authentic representation of a historically significant firearm. The Type 56, being a variant of the AK-47, holds considerable historical context and is widely recognized. A replica allows individuals to experience aspects of tactical simulation and historical appreciation without the need for owning or handling actual firearms.

The following sections will delve into the specifics of this model’s construction, performance characteristics, available upgrades, and considerations for its safe and responsible use in airsoft activities.

Enhancing the Performance of the Airsoft Type 56 Replica

The following suggestions aim to optimize the functionality and longevity of this specific airsoft replica through focused maintenance and strategic upgrades.

Tip 1: Regular Cleaning: Consistent cleaning of the internal barrel and hop-up unit is crucial. Utilize a cleaning rod and silicone oil to remove accumulated debris, ensuring consistent shot accuracy and range.

Tip 2: Hop-Up Adjustment: Fine-tune the hop-up system to match the BB weight being used. Proper hop-up adjustment extends range and promotes a flatter trajectory. Experiment with minor adjustments until the desired effect is achieved.

Tip 3: Lubrication: Apply silicone oil sparingly to moving parts, such as the charging handle and trigger mechanism. This reduces friction, prevents wear, and ensures smooth operation. Avoid over-lubrication, as it can attract dirt and hinder performance.

Tip 4: BB Quality: Use high-quality, seamless BBs with a consistent weight. Lower-quality BBs can cause jams, damage internal components, and negatively impact accuracy.

Tip 5: Spring Replacement: Over time, the mainspring may weaken, resulting in reduced power. Replacing the spring with an upgraded variant can restore or even increase the replica’s firing velocity. Consult a knowledgeable airsoft technician for appropriate spring selection.

Tip 6: Tightbore Barrel Installation: Installing a tightbore barrel can improve accuracy and consistency by reducing the amount of air around the BB as it travels through the barrel. Ensure compatibility with the model’s specifications before installation.

By diligently adhering to these maintenance practices and considering performance enhancements, users can maximize the capabilities of this airsoft replica and extend its operational lifespan.

Subsequent sections will cover safety protocols and responsible usage guidelines for the safe operation of this replica in airsoft environments.

1. Manufacturer

The designation “Double Bell” preceding “airsoft Type 56” serves as the primary identifier for the product’s origin and, consequently, can imply certain characteristics regarding build quality, materials used, and overall performance. As the manufacturer, Double Bell is directly responsible for the design, manufacturing process, and quality control of this specific replica. The manufacturer’s reputation, therefore, directly influences consumer perception and expectations of the airsoft Type 56 replica. For example, a manufacturer with a history of producing durable and realistic replicas will likely instill more confidence in potential buyers than a manufacturer known for low-quality products.

Understanding the manufacturer is crucial when considering factors such as spare part availability and upgrade compatibility. Different manufacturers may use proprietary designs or dimensions, making it essential to know the origin of the replica to ensure that replacement parts or performance upgrades will function correctly. Furthermore, the manufacturer often determines the target market and price point, which can affect the intended use and level of realism in the replica. Some manufacturers prioritize affordability, while others focus on producing high-end, meticulously detailed replicas for collectors and serious airsoft enthusiasts.

In conclusion, Double Bell’s role as the manufacturer of the airsoft Type 56 is not merely a branding element but a fundamental aspect influencing the product’s characteristics, performance, and overall value. The manufacturers reputation and production standards directly contribute to the perception and practical utility of the replica, impacting decisions related to purchase, maintenance, and customization. It is important to research the manufacturer to understand potential benefits or drawbacks associated with specific features before procurement of this item.

2. Model

The designation “Model: Type 56,” when connected to “double bell airsoft type 56,” indicates that the airsoft replica is designed to resemble the Chinese Type 56 assault rifle. This model specificity directly affects the replica’s external appearance, including its overall shape, dimensions, and distinctive features such as the hooded front sight and folding bayonet (if included in the replica). The Type 56 designation dictates that the replica should accurately replicate these visual elements to maintain a degree of realism for airsoft enthusiasts and collectors. Without the “Type 56” model designation, the replica would simply be a generic airsoft rifle, lacking the specific historical and aesthetic attributes associated with the real-world firearm. For example, if the replica were inaccurately proportioned or lacked the characteristic hooded front sight, it would fail to authentically represent the Type 56, diminishing its appeal to individuals seeking a realistic representation.

The selection of the Type 56 model also influences the internal design and potential upgrade paths of the airsoft replica. While the internal mechanisms of an airsoft gun are not always directly related to the external appearance of the firearm it replicates, the Type 56 designation can influence the choice of hop-up unit, gearbox type (in electric airsoft guns), and other internal components to best simulate the performance characteristics of the original rifle. Furthermore, the Type 56’s widespread recognition and popularity can lead to the availability of specific upgrade parts and accessories designed to enhance its performance or replicate authentic details. Airsoft technicians and enthusiasts may seek out Type 56-specific magazines, slings, or other attachments to further customize their replica.

In summary, the “Model: Type 56” component of “double bell airsoft type 56” is crucial for defining the replica’s visual identity and influencing its design, performance, and upgrade potential. This designation ensures that the replica adheres to the specific characteristics of the Type 56 assault rifle, providing users with a more authentic and engaging airsoft experience. Failing to accurately represent the Type 56 would undermine the replica’s value to those seeking a faithful representation of this historically significant firearm. The proper identification as “Model: Type 56” is critical for both sales and operation of the Double Bell produced replica.

3. Mechanism

The “Mechanism: Spring/Gas Blowback” specification for a “double bell airsoft type 56” replica delineates the power source and operational method employed to propel projectiles. A spring-powered mechanism utilizes a compressed spring to generate the force required to launch BBs, typically requiring manual cocking before each shot. Gas blowback, conversely, uses compressed gas (e.g., CO2 or green gas) to both propel the BB and simulate the recoil action of a real firearm. This specification directly influences the replica’s firing rate, power, realism, and maintenance requirements. For instance, a spring-powered Type 56 generally offers lower initial cost and simpler maintenance compared to its gas blowback counterpart, but sacrifices the realism of recoil and potentially lower rate of fire. A gas blowback mechanism, while offering enhanced realism, necessitates the procurement and handling of compressed gas canisters, potentially increasing operational costs and requiring more frequent maintenance due to the complex internal mechanisms and seals.

The choice of mechanism significantly impacts the airsoft experience. A spring-powered Type 56 is often favored in scenarios where simplicity, cost-effectiveness, and consistent performance are paramount, such as target practice or beginner airsoft skirmishes. Gas blowback models, on the other hand, are preferred for more immersive and realistic simulations, often sought by experienced airsoft players or those prioritizing authentic firearm handling characteristics. The gas blowback mechanism’s simulated recoil adds a tactile element to the shooting experience, potentially enhancing training value and enjoyment. Moreover, gas blowback systems frequently allow for adjustable firing power, permitting adaptation to different field regulations and engagement ranges. For example, in a close-quarters battle (CQB) environment, a lower power setting can prevent injuries while adhering to safety protocols.

In summary, the “Mechanism: Spring/Gas Blowback” element of the “double bell airsoft type 56” description is pivotal in determining the replica’s operational characteristics, maintenance demands, and suitability for various airsoft applications. Spring-powered models prioritize simplicity and affordability, while gas blowback models emphasize realism and enhanced performance capabilities. The selection of the appropriate mechanism is contingent upon the user’s priorities, budget, and intended use of the airsoft replica. The understanding of this key specification is essential for making informed purchasing decisions and maximizing the user’s satisfaction with the product. Safety protocols must always be observed, regardless of the chosen mechanism.

4. Ammunition

The specification “Ammunition: 6mm BBs” defines the projectile type and size compatible with the Double Bell airsoft Type 56 replica. This is a critical parameter affecting performance, safety, and compatibility with the airsoft gun’s internal mechanisms.

• Standardization and Compatibility

  The 6mm BB designation signifies adherence to a widely adopted industry standard in airsoft. This standardization ensures readily available ammunition from various manufacturers and simplifies the process of selecting compatible projectiles. Deviation from this standard, such as attempting to use 8mm BBs, would likely result in jamming, damage to the internal components, and a failure to properly function. Proper adherence ensures safe use.

• Material Composition and Weight

  6mm BBs used in this airsoft replica are typically made of plastic, although biodegradable options exist. The weight of the BB, typically ranging from 0.12g to 0.30g, influences the projectile’s trajectory, range, and accuracy. Heavier BBs are generally less susceptible to wind and offer greater accuracy at longer distances, while lighter BBs provide higher velocity at shorter ranges. The selection of appropriate weight depends on the replica’s power output and intended application.

• Performance and Accuracy

  The quality and consistency of the 6mm BBs directly impact the performance of the airsoft Type 56. Seamless, high-precision BBs minimize inconsistencies in flight, leading to improved accuracy and reduced risk of jamming. Lower-quality BBs with imperfections or varying sizes can negatively impact trajectory and potentially damage the replica’s internal mechanisms. The consistent and correct use of 6mm ammunition is essential.

• Safety Considerations

  The use of 6mm BBs necessitates adherence to safety protocols, including the use of appropriate eye protection during airsoft activities. While these projectiles are relatively low-impact, they can still cause injury to unprotected eyes or exposed skin. Responsible usage and adherence to established safety guidelines within airsoft environments are crucial to prevent accidents and ensure the well-being of participants. Adhering to these will benefit users and others present.

In conclusion, “Ammunition: 6mm BBs” is a fundamental aspect of the Double Bell airsoft Type 56, dictating the compatible projectile type, influencing performance characteristics, and necessitating adherence to safety guidelines. Proper selection and handling of 6mm BBs are essential for optimal performance, safe operation, and the overall enjoyment of the airsoft experience. Using improper components will degrade the performance and experience.

5. Material

The composition of “Metal/Polymer” in the construction of the double bell airsoft Type 56 replica significantly influences its durability, weight, aesthetic realism, and overall cost. The strategic use of these materials balances the desire for authentic replication with considerations of manufacturability and practical use in airsoft skirmishes. This combination dictates both the aesthetic value and the functional capabilities of the product.

• Durability and Longevity

  Metal components, such as the receiver, barrel assembly, and sights, contribute to the replica’s structural integrity and resistance to wear and tear during prolonged use and handling. Polymer elements, often found in the handguard, stock, and pistol grip, provide impact resistance and reduce overall weight, enhancing maneuverability on the field. For example, a metal receiver can withstand greater stress from internal mechanisms and external impacts compared to a polymer equivalent, while a polymer stock is less prone to cracking or shattering upon impact. The combination ensures a level of resilience suitable for active use.

• Weight and Handling

  The balance between metal and polymer directly affects the replica’s weight distribution and ease of handling. An entirely metal replica would be significantly heavier, potentially hindering maneuverability and causing fatigue during extended use. Polymer components reduce the overall weight, making the replica more comfortable to carry and wield, particularly for younger or less experienced airsoft players. For instance, a heavier, all-metal replica may be more realistic in feel but could be less practical for dynamic movement and quick target acquisition. The strategic use of polymer contributes to a more user-friendly experience.

• Aesthetic Realism

  The choice of materials impacts the perceived realism of the airsoft Type 56 replica. Metal components often provide a more authentic look and feel, replicating the cold, hard texture of the real firearm. However, advancements in polymer manufacturing allow for convincing replication of wood or metal finishes, enhancing the aesthetic appeal without sacrificing the benefits of reduced weight and increased durability. The use of realistic finishes further enhances the experience for collectors and reenactors.

• Manufacturing Cost and Affordability

  The use of polymer, particularly in less critical components, helps to reduce manufacturing costs, making the airsoft Type 56 replica more accessible to a wider range of consumers. Metal components are generally more expensive to produce due to the higher cost of raw materials and more complex manufacturing processes. By strategically incorporating polymer, manufacturers can offer a reasonably priced replica without compromising on essential durability and performance characteristics. This affordability expands the accessibility and use of these replicas.

The Metal/Polymer construction of the double bell airsoft Type 56 embodies a pragmatic approach to balancing realism, durability, usability, and affordability. This material combination is not merely an arbitrary choice but rather a calculated decision that reflects the practical demands of airsoft skirmishes and the desire to offer a replica that is both aesthetically pleasing and functionally robust. The specific materials used and their distribution across the replicas components represent a compromise between competing factors, ultimately shaping the overall user experience and perceived value of the product. This consideration reflects both user demands and the producer goals in a functional package.

6. Intended Use

The designation “Intended Use: Airsoft” establishes the double bell airsoft Type 56 replica as a product specifically designed for participation in organized airsoft skirmishes and recreational target shooting activities. This intended use dictates key design parameters, performance characteristics, and safety considerations that are integral to the replica’s construction and operation.

• Regulatory Compliance and Field Legality

  The “Airsoft” designation ensures the replica adheres to regulations governing airsoft markers at organized fields. These regulations typically restrict maximum projectile velocity (measured in feet per second, or FPS) to ensure participant safety. The double bell airsoft Type 56 must, therefore, be engineered to fire within acceptable FPS limits to be legally used at recognized airsoft facilities. Failure to comply with these regulations can result in exclusion from gameplay and potential legal repercussions. For example, many fields have a maximum FPS limit of 400 with 0.20g BBs for automatic rifles, necessitating careful consideration of the replica’s power output.

• Performance Optimization for Skirmish Scenarios

  The “Airsoft” designation implies that the replica’s performance characteristics are optimized for typical airsoft engagement ranges and gameplay styles. This includes factors such as accuracy at medium distances, a manageable rate of fire (if applicable to electric or gas-powered models), and a magazine capacity suitable for sustained engagements. An airsoft Type 56 designed for skirmishes would likely prioritize a balance between range, accuracy, and ammunition capacity, as opposed to maximizing raw power or focusing solely on close-quarters combat. For instance, a well-tuned hop-up system and a consistent firing mechanism are crucial for effective performance in a variety of field conditions.

• Material Selection and Durability Considerations

  The intended use in airsoft influences the choice of materials used in the replica’s construction. While some realism is desired, durability and resistance to wear and tear are paramount. The double bell airsoft Type 56 will typically incorporate robust materials, such as metal alloys and high-impact polymers, to withstand the stresses of repeated use in dynamic outdoor environments. These materials must be capable of withstanding impacts, exposure to weather elements, and the rigors of transportation to and from airsoft fields. For example, reinforced gearboxes and durable external components are essential for ensuring the replica can withstand the demands of sustained airsoft gameplay.

• Safety Features and Responsible Usage Protocols

  The “Airsoft” designation necessitates the incorporation of safety features and adherence to responsible usage protocols. This includes the provision of clear safety instructions, the requirement for eye protection during operation, and the promotion of responsible gun handling practices. The double bell airsoft Type 56 should be designed and marketed with an emphasis on safe and ethical use within the airsoft community. Examples of safety features include orange tip, safety switch, and adherence to responsible handling practices by all users.

In summary, the “Intended Use: Airsoft” specification of the double bell airsoft Type 56 is not merely a marketing label but a fundamental determinant of the replica’s design, performance, and safety characteristics. This designation ensures the product is suitable for use in organized airsoft activities while adhering to relevant regulations and promoting responsible usage practices. By aligning with the specific demands of the airsoft community, the double bell airsoft Type 56 aims to provide a realistic, durable, and safe replica for enthusiasts and players alike.

Frequently Asked Questions

This section addresses common inquiries regarding the Double Bell Airsoft Type 56, providing essential information for prospective buyers and current owners.

Question 1: What are the power source options available for the Double Bell Airsoft Type 56?

Answer: The Double Bell Airsoft Type 56 is available in both spring-powered and gas blowback (GBB) variants. Spring-powered models require manual cocking before each shot, while GBB models utilize compressed gas (typically green gas or CO2) for semi-automatic or fully automatic operation, simulating recoil.

Question 2: What is the typical effective range and accuracy of the Double Bell Airsoft Type 56?

Answer: Effective range varies depending on the specific model and power source. Spring-powered models generally offer a range of 50-100 feet, while gas blowback models can achieve ranges of 100-150 feet with proper hop-up adjustment. Accuracy is influenced by factors such as BB weight, wind conditions, and user skill.

Question 3: What type of maintenance is required for the Double Bell Airsoft Type 56?

Answer: Maintenance requirements differ based on the power source. Spring-powered models necessitate occasional lubrication of the piston and spring. Gas blowback models demand more frequent cleaning and lubrication of internal components, including the gas magazine and nozzle, to prevent leaks and ensure consistent performance.

Question 4: What are the common upgrade options for the Double Bell Airsoft Type 56?

Answer: Upgrade options vary depending on the specific model and user preferences. Common upgrades include tighter bore barrels for improved accuracy, stronger springs for increased power (spring-powered models), and enhanced hop-up buckings for optimized BB trajectory. For GBB models, reinforced internal components can improve reliability and longevity.

Question 5: What safety precautions should be observed when using the Double Bell Airsoft Type 56?

Answer: It is crucial to wear appropriate eye protection at all times when handling or operating the Double Bell Airsoft Type 56. The replica should be treated as if it were a real firearm, with the muzzle pointed in a safe direction. The replica must be stored securely and inaccessible to unauthorized individuals, particularly children. Adherence to field rules is paramount.

Question 6: Is the Double Bell Airsoft Type 56 suitable for beginner airsoft players?

Answer: The suitability for beginners depends on the specific model. Spring-powered versions offer a simple and affordable entry point due to their ease of use and maintenance. Gas blowback models require more experience and understanding of airsoft mechanisms due to their complexity and potential for maintenance issues. Beginners should always receive proper instruction and supervision before using any airsoft replica.

The Double Bell Airsoft Type 56 provides both accessible and challenging avenues for airsoft enthusiasts. Understanding the specific model’s characteristics and adhering to safety protocols are essential for a positive experience.

The following section explores modifications and aftermarket products enhancing the Double Bell Airsoft Type 56 model.

Conclusion

This exploration of the Double Bell Airsoft Type 56 has encompassed its design characteristics, performance parameters, maintenance requirements, upgrade options, and safety considerations. The analysis has highlighted its role as a replica firearm intended for airsoft activities, with variations in power source, material composition, and intended skill level influencing its suitability for different users and scenarios. Emphasis has been placed on responsible operation, adherence to safety protocols, and regulatory compliance within the airsoft community.

The Double Bell Airsoft Type 56 serves as a tangible entry point into the world of historical firearm appreciation and tactical simulation. Continued responsible use and a commitment to safety will determine its future value within the airsoft community. Further research and adherence to best practices are encouraged for both current and prospective owners.